[RE-wrenches] Inverter Data

[boB Gudgel]

Orion Thornton wrote:
>
> Wrenches,
>
>  
>
> Can anyone help me to determine the commutation type and rated power 
> factor (%) for a Fronius 4000 IG.  These are required line items on a 
> permit application.  The options for commutation type are forced and 
> line.  I feel like this may apply to older inverter technology but I 
> am not sure.  Any help would be appreciated.
>
>  
>
> Orion Thornton
>
> Independent Power Systems
>
>  
>

The inverters' Commutation is  done electronically  but I have see the 
term "Line Commutation" used in regards to grid tie before too.

 Maybe you could just say  "Electronic Switching Commutation"  ?  Or, 
"Solid State Commutation"  ?

Power Factor is an easy one...   PF  =  1.0

boB


>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>