[RE-wrenches] SS Tek Crews

[Karl Schwingel]

I get self drillers from fastenal.  self drilling 400 series stainless 
with a washer head. no neoprene alas....

karl


Peter Parrish wrote:
> Does anyone have a source for stainless steel, self tapping Tek screws? I
> could use some #10/3-4 and #10/1-1/2. If they have the little cap and
> neoprene washer that would be even better!
>
> - Peter
>
> Peter T. Parrish, President
> California Solar Engineering, Inc.
> 820 Cynthia Ave., Los Angeles, CA 90065
> Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
> CA Lic. 854779, NABCEP Cert. 031806-26
> peter.parrish at calsolareng.com 
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>   

-- 
Karl Schwingel
NABCEP Certified Solar Thermal Installer
NorthWind Renewable Energy LLC

PO Box 723 Stevens Point, WI 54481
Karl at Northwindre.com
Cell: 715 209 0446
Fax : 715 952 4501


This e-mail message is confidential, is intended only for the named
recipient(s) above, and may contain information that is privileged or
exempt from disclosure under applicable law. If you have received this
message in error, or are not a named recipient(s), you are hereby notified
that any dissemination, distribution or copying of this e-mail is strictly
prohibited. If you have received this message in error, please immediately
notify the sender by return e-mail and delete this e-mail message from
your computer. Thank you.