[RE-wrenches] Thermal issues with PVC (was RE: raintite box mounting angle)
Drake Chamberlin
drake.chamberlin at redwoodalliance.org
Tue Aug 25 06:15:49 PDT 2009
You can get metal NEMA 4 and NEMA 12, gasket sealed boxes made by
Hoffman. There should be no deformation issues. The only possible
issue could be the temperature of the gasket, but it would be held in
place by the clamped cover. Have the gaskets had an issue with the
deformed PVC boxes?
At 10:44 PM 8/24/2009, you wrote:
>Hans,
>
>that is an interesting reference, well done.
>what about if the box is under the panels and only experiencing
>ambient temperatures?
>That is kind of my current preference when I have to use pvc due to
>the deforming issues...
>since the panels are movable by unbolting the slow-release mounting
>system, it is alright.
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090825/291261d3/attachment-0003.html>
More information about the RE-wrenches
mailing list