[RE-wrenches] Craftsman 82062 DC/AC Amp Clamp

[penobscotsolar at midmaine.com]

I've dropped my six year old Fluke 337 three times, once off a second
story ladder onto a gravel driveway, and I'm still using it without ever
sending it off for repair.

Daryl DeJoy
NABCEP Certified PV installer
Penobscot Solar Design




> Don't know about the rest of you, but I can and eventually will drop
> anything.....
>
> Bob
>
> On Tue, Jul 21, 2009 at 9:03 PM, Joel Davidson
> <joel.davidson at sbcglobal.net>wrote:
>
>> Thank you all for the good advice. Is the Fluke 336 rugged? Can it be
>> dropped?
>>
>> ----- Original Message ----- From: "Max Balchowsky" <max at seesolar.com>
>> To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
>> Sent: Tuesday, July 21, 2009 10:02 AM
>> Subject: Re: [RE-wrenches] Craftsman 82062 DC/AC Amp Clamp
>>
>>
>>
>>
>>> Joel, the best "tool" Investment I ever made was my Fluke 336 (had it
>>> for
>>> years until someone wanted it bad enough to steal), I replaced it with
>>> a 337
>>> and have a Mastech MS2138R as a back up, both have served me well......
>>>
>>> Max Balchowsky
>>> SEE Systems
>>> Newport Beach, Ca.92662
>>> 760-403-6810
>>>
>>>
>>>
>>> ----- Original Message ----
>>> From: Joel Davidson <joel.davidson at sbcglobal.net>
>>> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
>>> Sent: Tuesday, July 21, 2009 7:40:34 AM
>>> Subject: [RE-wrenches] Craftsman 82062 DC/AC Amp Clamp
>>>
>>> Wrenches,
>>>
>>> I really like my little Craftsman 82062 Multi-Meter with DC/AC Amp
>>> Clamp
>>> because it has a wide range, measures amps, volts, continuity, and low
>>> price. It's a handy little all-in-one trouble-shooting tool - when it
>>> works.
>>> The trouble is it does not stand up to field use (cheap). I'm really
>>> careful
>>> (even have the original cheap plastic case in brand new condition) but
>>> have
>>> gone through 3 meters in a few years. Any recommendations for a small
>>> multi-meter with a small DC amp clamp for getting into tight spaces? As
>>> always, thank you very much for your advice.
>>>
>>> Joel Davidson
>>> _______________________________________________
>>> List sponsored by Home Power magazine
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Options & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive:
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out participant bios:
>>> www.members.re-wrenches.org
>>> _______________________________________________
>>> List sponsored by Home Power magazine
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Options & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive:
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out participant bios:
>>> www.members.re-wrenches.org
>>>
>>>
>> _______________________________________________
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>