[RE-wrenches] DR>FX Compatibility Problem

[Jeff Oldham]

Not sure if anyone offered this already - The DR will do a 5 sec. surge to 6200W the Outback will do a 5 sec. surge to 4800W. This is common, most mod's will surge considerable more than Sine's, that is the big trade off other than power quality and tare losses. In addition I'm very skeptical that the Staber only surges to 11A, have you measured the actual surge? When I replaced my good 'ol Trace 2512 (too many appliances disliked the mod. sine) and went to a Magnum 2812 my washer would kick it out as my washer surged to 31A and the Mag. would do 30! This is a modern Horz. axis machine. I now have the Magnum and a new Vanner ITC 12-3200W that does a 3 sec. surge to 6400W and will even run my wire welder and air compressor, both used to be genny only loads.
-jeff o


>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative SOLutions
____________________________________________________________
Save on Moving Supplies. Click Here!
http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsO5rqs0XFce7Kv5he9my9wladhhKmoLFHmZR1NYtfaefo7OuBa2XW/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090618/760150e3/attachment-0003.html>