[RE-wrenches] CHP Generator
Chris Worcester
chris at solarwindworks.com
Wed May 6 15:34:26 PDT 2009
Hi Orion,
My used 1967 flat head four cylinder powered 10kW Kohler LPG unit came with
the outputs from the block for plumbing in a car heater, so I adapted it to
a homemade heat exchange system. It wouldn't be too much of a stretch to
modify the radiator hoses with some custom tees to do the same on your
install.
Sincerely,
Chris Worcester
NABCEP Certified PV Installer
Phone: 530-582-4503
Fax: 530-582-4603
www.solarwindworks.com <http://www.solarwindworks.com/>
chris at solarwindworks.com
"Proven Energy Solutions"
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Orion
Thornton
Sent: Wednesday, May 06, 2009 1:08 PM
To: 'RE-wrenches'
Subject: [RE-wrenches] CHP Generator
Wrenches,
Does anyone have any experience with or have a product they can recommend
for a combined heat and power generator, specifically for an off-grid
application. The prospective client would like to combine the electrical
generation/charging capacity with their planned in-floor radiant heating
system.
Thanks in advance for any information.
Orion Thornton
Independent Power Systems
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090506/e94a233e/attachment-0003.html>
More information about the RE-wrenches
mailing list