[RE-wrenches] MPPT greater than 150V

Tump tump at hughes.net
Thu Mar 26 18:01:12 PDT 2009


I certainly am aware of the things both bob & robin, mary & crew have made
in the industry.
THANK YOU MIDNITE! I too am glad that they have some "working" units out
there. I have voiced my frustrations to the Midnite folks & knowing robin &
mary personally I'm certain that my comments will not be taken as insulting.

Still I/we've been waiting a long time. 

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Jennifer
Bryce
Sent: Thursday, March 26, 2009 9:32 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] MPPT greater than 150V


" Zzzzzzzz"?  In Midnites defense, I can tell you mine works great! Good
products take a long time to make sure that YOU do not end up as  
the Beta tester.
(The most common way for RE gear manufacturers to refine products)

It is a double edged sword, we beat the manufactures up for not  
delivering product.
Then stab them if units have problems once released. Just read through  
the archive.

My Beta Classic is rock solid and doing great, it has worked well on  
my solar arrays and wind turbines for over half a year.
No smoke here, it is a real product.




On Mar 26, 2009, at 7:06    -Mar 26, Tump wrote:

> Zzzzzzzz We've been waiting for a HI voltage CC!  A standard unit?
> Yeah
> and.....
>
> -----Original Message-----
> From: re-wrenches-bounces at lists.re-wrenches.org
> [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of 
> ryan at solar4maine.com
> Sent: Thursday, March 26, 2009 6:46 AM
> To: re-wrenches at lists.re-wrenches.org
> Subject: [RE-wrenches] MPPT greater than 150V
>
>
>
> Midnites Classic CC is close they are beta testing there high
> voltage unit.
>
> I am actually beta testing there standard voltage unit. boB is
> working very
> hard on these and i suspect we will see them soon. There is a long  
> list of
> features packed into this little unit. I will let boB or Robin fill  
> in all
> the blanks but we should be going live with all the beta sites on  
> the net
> soon.
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings: 
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings: 
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>






Pine Ridge Products LLC
1646 East Highwood RD
Belt, MT 59412

406-738-4283

www.pineridgeproducts.com
www.chinookturbines.com



_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org






More information about the RE-wrenches mailing list