[RE-wrenches] Panel Fire
Drake Chamberlin
drake.chamberlin at redwoodalliance.org
Wed Feb 11 07:48:31 PST 2009
The last post on your discussion forum, from the person identified as
BB, looks the most likely. The modules were large (250 W), corner
mounted, with plastic (instead of glass) "glazing." The panels were
able to flex under wind load, and damage the internal conductors. It
looks to me from the before photo, that the modules are already bowed
a bit. That could be an optical illusion.
That the "glazing" was plastic is evidenced by the fact that it
burned up. If the material was glass, it would not have
disintegrated the way it did.
At 01:42 AM 2/11/2009, you wrote:
>In view of the recent discussion here about fires and PV systems,
>you might all want to take a look at this post that someone just
>posted on our forum
>
>http://www.wind-sun.com/ForumVB/showthread.php?t=4524
>
>I never heard of this happening before.
>
>..................................................................................................
>Northern Arizona Wind & Sun - Electricity From The Sun
>Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
>..................................................................................................
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
740-448-7328
740-856-9648
More information about the RE-wrenches
mailing list