[RE-wrenches] Wanted: poly battery boxes, many sizes
Karl Schwingel
karl at northwindrenewable.com
Thu Feb 5 14:08:17 PST 2009
been out of the country for a week. should read all the posts before
replying. great minds think alike. Just put in one bin in the boonies
of Haiti. holding 4 trojan 90 ah gel cells, with a DR 1512 bolted to
the top of the bin, and all charge controllers and LVDs bolted to the
inside of the box with holes so one can see the blinky lights.
pics available, for those that care.
karl
Kent Osterberg wrote:
> Larry,
>
> I've found the Contico Pro Tuff Bin (Lowes part number 91573 - $65, or
> Grainger part number 1DZE8 - $70) to work well for holding four L-16
> batteries.
>
> Kent Osterberg
> Blue Mountain Solar
> www.bluemountainsolar.com
>
>
> Starlight Solar, Yuma, AZ wrote:
>> Greetings Wrenches,
>>
>> I need to find a supplier of polyethylene battery boxes for small
>> batteries. 2,4 or 6 golf cart batteries will need to fit in several
>> different configurations. Also for two or four L-16's. Contact me if
>> you know of any manufacturers or distributors for such products.
>>
>>
>> Kindest Regards,
>>
>> Larry Crutcher
>> Starlight Solar
>> (928) 941-1660
>> Renewable Energy Products, Service and Installation
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
--
Karl Schwingel
NABCEP Certified Solar Thermal Installer
NorthWind Renewable Energy LLC
PO Box 723 Stevens Point, WI 54481
Karl at Northwindre.com
Cell: 715 209 0446
Fax : 715 952 4501
This e-mail message is confidential, is intended only for the named
recipient(s) above, and may contain information that is privileged or
exempt from disclosure under applicable law. If you have received this
message in error, or are not a named recipient(s), you are hereby notified
that any dissemination, distribution or copying of this e-mail is strictly
prohibited. If you have received this message in error, please immediately
notify the sender by return e-mail and delete this e-mail message from
your computer. Thank you.
More information about the RE-wrenches
mailing list