[RE-wrenches] FW250

[Drake Chamberlin]

Hello Wrenches,

There is a potential customer that purchased some equipment, 
including a FW250 box, that goes on the end of the  VFX inverter.

http://www.outbackpower.com/pdf/manuals/900-0060-1_REV_A.pdf

I've not installed one of these yet.  Looking at the manual, it looks 
extremely tight, especially on the DC side.  Has anyone had 
experience with these?  Is there sufficient wire bending space?


Thanks,

Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM  Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20090826/e7c1b4f2/attachment-0002.html>