grundfos sqflex [RE-wrenches]
Matt Tritt
solarone at charter.net
Wed Jun 25 16:56:44 PDT 2008
<x-flowed>
Jay and Windmeister,
Even though the flow may come from the top of the pump, there is still
enough residual flow from the bottom to keep the motor happy - unless
you happen to be pumping from a hot water strata. :-)
Matt T
Windy Dankoff wrote:
>
>
> Jay,
>
> I have never seen any data to answer your question, but it seems not
> to be critical. I have been told that only a very small flow is
> needed to cool a (conventional) motor and that it the danger lies in
> stagnation and warming of water around the motor when not confined in
> a flow-inducing tube.
>
> Windy
>
>
>> Hi Windy,
>>
>> Thanks for the info.
>>
>> If I have access to a band saw, I use it to make many passes on the
>> pipe 1-2" deep, works well.
>>
>> I am curious about one thing. In a well, often the "fresh" water
>> comes from above the pump. So in such a case
>> the water below the pump isn't being used. Does the pipe casing at
>> this point provide the chimney effect to bring cooling
>> water to the motor below the pump?
>>
>> jay
>>
>> peltz power
>
>
> --
> [Non-text portions of this message have been removed]
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>------------------------------------------------------------------------
>
>
>No virus found in this incoming message.
>Checked by AVG.
>Version: 8.0.101 / Virus Database: 270.4.1/1516 - Release Date: 6/24/2008 7:53 AM
>
>
[Non-text portions of this message have been removed]
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list