commdeck [RE-wrenches]

[Daryl DeJoy]

The commdeck isn't deep enough for breakers (already tried it) but it
seems like if the company had that feedback they could manufacture it to
work that way. It is UL listed. It also has a ground block in it.



>
> I stand corrected.  On my own roof I'd probably just goo and screw it to
> the
> decking/rafter.
> I'd like to see if the commdeck has room for a piece of DIN rail (and a
> couple of circuit breakers or fuse holders)  and a couple of isolated buss
> bars.  That'd be way slick.
>
> Code legality and UL listing of the Commdeck?
>
> Karl
>
> ----- Original Message -----
> From: "Mark Frye" <markf at berkeleysolar.com>
> To: <RE-wrenches at topica.com>
> Sent: Friday, April 25, 2008 1:25 PM
> Subject: RE: commdeck [RE-wrenches]
>
>
>>
>> The Wiley product is an "array to conduit transition" device. You still
>> have
>> to get the conduit through the roof with some kind of penetration
>> (unless
>> you are going back to the old caulk and screw method used with a
>> standard
>> box). The Soladeck is a complete wiring and roof penetration device.
>>
>> The wiley isn't promoted as a roof penetration.
>>
>> So not really equivalent but possibly complementary products.
>>
>> Mark Frye
>> Berkeley Solar Electric Systems
>> 271 Vistamont Dr
>> Grass Valley CA 95945
>> (530) 401-8024
>> www.berkeleysolar.com
>>
>> -----Original Message-----
>> From: Karl Schwingel [mailto:karl at northwindrenewable.com]
>> Sent: Friday, April 25, 2008 7:35 AM
>> To: RE-wrenches at topica.com
>> Subject: Re: commdeck [RE-wrenches]
>>
>>
>> Wiley electronics has a specific built roof penetration/combiner with
>> buss
>> bars and DIN rail for breakers/fuse holders.
>> donno if it's available yet, but I'm ordering several for upcoming jobs.
>> will post thoughts.
>>
>> Karl Schwingel
>> North Wind Renewable Energy, LLC
>> PO Box 723
>> Stevens Point, WI 54481
>> 715-209-0446 cell
>>
>>
>> Karl at northwindrenewable.com
>>
>>
>> - - - -
>> Hosted by Home Power magazine
>>
>> To send a message: RE-wrenches at topica.com
>>
>> Archive of previous messages:
>> http://lists.topica.com/lists/RE-wrenches/read
>>
>> List rules & how to change your email address:
>> www.mrsharkey.com/wrenches/etiquette.php
>>
>> Check out participant bios: www.mrsharkey.com/wrenches/
>>
>> Moderator: michael.welch at homepower.com
>>
>>
>>
>>
>> --
>> Internal Virus Database is out-of-date.
>> Checked by AVG Free Edition.
>> Version: 7.5.516 / Virus Database: 269.22.3/1354 - Release Date:
>> 4/1/2008
>> 5:38 AM
>>
>>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------