GJ breaker offer [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

<x-flowed>

Allan,

I have had a few of these fragile things break myself when in the field 
and have developed a great way to repair them. First drill a hole in the 
handle and matching hole in the remaining stump sticking out of the 
breaker. Next cut the head off a threaded bolt and epoxy this "spline" 
into both ends, and you have repaired the breaker handle stronger than 
it was to begin with.

Todd

Allan Sindelar wrote:

>Wrenches,
>I have two Heinemann GJ250 breakers (as used by Xantrex, Outback, etc.
>with the handles broken off that I’ll give away for shipping cost. They
>work fine, and can be manually switched on and off. I use a broken GJ175
>in my home system, and I prefer it because kittycats can’t turn the
>inverter off by using the handle as a jumping step, but I’ll never sell
>one. Contact me offlist if interested at the address below.
>
>Allan Sindelar
>HYPERLINK
>"mailto:allan at positiveenergysolar.com"allan_(at)_positiveenergysolar.com
>NABCEP certified solar PV installer
>Positive Energy, Inc.
>3225A Richards Lane
>Santa Fe NM 87507
>505 424-1112
>  
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>