Module wiring safety [RE-wrenches]

Matt Tritt solarone at charter.net
Wed Jan 23 19:51:31 PST 2008


<x-flowed>

Wow Mark. This is so similar to "my" idea I can hardly believe it. Now, 
if they could do it with non-metallic frames...............................

Matt

Mark Frye wrote:

>Matt.
>
>Check out http://www.andalay.net/cm/Home.html
>
>MPF
>
>-----Original Message-----
>From: Matt Tritt [mailto:solarone at charter.net] 
>Sent: Wednesday, January 23, 2008 7:02 PM
>To: RE-wrenches at topica.com
>Subject: Re: Module wiring safety [RE-wrenches]
>
>
>This is all getting so interesting.
>
>A number of years ago I suggested to a module manufacturer that they switch
>from a metallic frame to pultruded fiberglass and, while they were at it,
>instead of supplying a pair of leads to connect to - create a waterproof
>polarized plug on the ends of each module that would allow joining the
>modules in series and, at each series end, allow a plug-in home run (to a
>combiner). This would eliminate the need for grounding frames and
>interconnect wires (and be nice and clean).
>
>They graciously declined to spend a bunch of money on R&D' ing something so
>unusual. But I still think it has some merit.
>
>Matt T
>
>
>- - - -
>Hosted by Home Power magazine
>
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Moderator: michael.welch at homepower.com
>
>
>
>
>  
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------

</x-flowed>



More information about the RE-wrenches mailing list