[RE-wrenches] Sealed battery test/maintenance
William Miller
wrmiller at charter.net
Tue Dec 16 11:06:59 PST 2008
Glenn:
There are a combination of tests, none as decisive as we might like: Load
the battery bank and test per cell voltage (more often we find warm
connections revealing related problems). Measure the at rest
voltage. Measure voltage over time at load. If you are serious about
this, establish base lines when batteries are new.
Good luck.
William Miller
At 09:55 AM 12/16/2008, you wrote:
>Good Holiday Season to all:
>
>Does anyone have a sealed (gel & AGM) battery test/maintenance procedure
>they would feel comfortable sharing with the group?
>I have been tasked with creating one for our company now that we have more
>than a couple of grid tied systems with battery backup.
>
>Hate to re-invent the wheel with so much talent available here.
>Thanks in advance!
>
>Regards,
>
>Glenn Burt
>Technical Specialist
>
>Renewable Power Systems, LLC
>PO Box 967
>Averill Park, NY 12018
>V: 518-674-5808
>C: 518-810-3174
>F: 518-514-1175
>E: gburt at RPSPower.com
>www.RPSpower.com
>
>
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Options & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
More information about the RE-wrenches
mailing list