[RE-wrenches] XW connection to PC?

mick abraham mick at abrahamsolar.com
Wed Dec 10 09:15:44 PST 2008


Thanks, Mark~

Did the T-tap device ever materialize? You had written about this as a way to get power onto the Xanbus network if an inverter/charger was absent from the system.

I think part number 865-1057 had been assigned. Please advise if this can now be ordered through distributor channels.

Mick Abraham, Proprietor 
www.abrahamsolar.com 
Voice: 970-731-4675

---------- Original Message -----------
From: "Mark Edmunds" <mark.edmunds at xantrex.com> 
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org> 
Sent: Wed, 10 Dec 2008 09:07:39 -0800 
Subject: Re: [RE-wrenches] XW connection to PC?

> Hi All – yes the XW Gateway unit is shipping, and givesyou either a wired or wireless connection to a local Ethernet network. The XW-Configtool is also available and provides a USB connection and software for set up andmonitoring via a PC. (I don’t think the Config tool is on the web siteyet, but can be ordered through the tech support group)
>  
> The built in com ports on the XW system devices use CAN bushardware, with a proprietary communication protocol, so either one of the abovedevices is the best way to make your connection from this to a computer.
>  
> Cheers,
>  
> Mark
>  
>  
> Mark Edmunds
> Xantrex Technology Inc.
>  
> 
> From: re-wrenches-bounces at lists.re-wrenches.org[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of mickabraham
> Sent: Wednesday, December 10, 2008 7:25 AM
> To: RE-wrenches
> Subject: Re: [RE-wrenches] XW connection to PC?
>  
> Here's a link to follow: 
> 
> http://www.xantrex.com/web/id/269/p/1/pt/5/product.asp 
> 
> I do not know if the Communications Gateway is shipping or not, but it's closeanyway. 
> 
> Mick Abraham, Proprietor 
> www.abrahamsolar.com
> Voice: 970-731-4675 
> 
> 
------- End of Original Message -------
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20081210/f3ca8879/attachment-0003.html>


More information about the RE-wrenches mailing list