[RE-wrenches] inverters/ generators and noise

jay peltz jay at asis.com
Thu Nov 20 08:10:24 PST 2008


Hi Bob,

Do you have any numbers as to what the HZ where or where you think it  
worked best?

thanks,

jay

peltz power
On Nov 20, 2008, at 3:38 AM, robert ellison wrote:

> Probably due to the load of the charger, try changing the rpm a  
> little (higher) if you can. Might help. I have had stoves that  
> wouldn't light under full charger load. They did better at a  
> somewhat higher rmp (frequency)
>
> Bob
>
> On Thu, Nov 20, 2008 at 12:12 AM, jay peltz <jay at asis.com> wrote:
> Hi All,
>
> here is along those same lines a question about line noise.
>
>
> System 15kw diesel generator
>
> 4 stack outback at 24v   120v/240vac
>
> 3000 amp hr industrial batteries.
>
> when genny running, 59.5-60 hz
> voltage 122/244
>
>
> Symptoms.
>
> when charging there is some buzzing on some electrical equipment in  
> the house.  Stove pizeo won't lite, transformer on furnace runs hot,  
> Fridge makes more noise.
> Seems to get worse at end of charge cycle.
>
>
> Now, with inverter only,  no noise, humm, buzz etc.
>
> With Genny only no buzz, humm, etc.
>
>
> Any advice?
>
> thanks,
>
> jay
>
> peltz power
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20081120/22fc5275/attachment-0003.html>


More information about the RE-wrenches mailing list