[RE-wrenches] SWH data logging
Kelly Keilwitz, Whidbey Sun & Wind
kelly at whidbeysunwind.com
Tue Nov 18 16:15:14 PST 2008
Carl,
Thanks for the info. Is data logging/collection possible with the Metrima
meters? There is a lot of information in a language I don¹t understand
in the ³communication² section of the link you provided.
-Kelly
On 11/14/08 7:39 PM, "Carl Adams" <swingjunkie at gmail.com> wrote:
> Kelly,
>
> I have installed several of the Metrima BTU/KWH meters for SHW. The kit comes
> with a flowmeter, temperature sensors and wells (hot and cold), and a
> calculator, nicely integrated. These are utility grade meters and more
> economical than the hardware you mentioned(dealer price $425). Check out TCT
> Solar ( http://www.tctsolar.com/ the US distributor). The only downside is
> that the units are BSP thread ( adapters to NPT are provided in the kit to
> drop the temperature wells and the flow meter into a 3/4" NPT line). I guess
> if we deployed more of these in the US we'd have NPT as a standard option.
> Another use I've found for these units is they allow me to adjustment for
> offsets in the tank temperature sensor vs the actual hot water temperature ( 2
> - 10 degrees typical), and adjust the high limit set point accordingly. I
> like the fact that customers can look at the kWh of energy delivered by the
> SHW system and easily convert to $$savings. Larger units are available for
> higher flow rates/pipe sizes.
>
> Cheers
> Carl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20081118/d9aede21/attachment-0003.html>
More information about the RE-wrenches
mailing list