[RE-wrenches] Utility disco DC?

[David Brearley]

One of my previous colleagues negotiated this on a high profile project in a
new jurisdiction. The inspector didn¹t have a problem with this.

You should definitely talk to the AHJ. It¹s not a difficult case to make: no
PV input = no inverter output.

Good luck,

David


On 9/2/08 2:56 PM, "Drake Chamberlin" <drake.chamberlin at redwoodalliance.org>
wrote:

> Hello Wrenches
> 
> Can the lockable utility disconnect be DC?  Has anyone tried this?   On an add
> on system we found this had been done.   It would be convenient to use this
> method.   
> 
> Thanks,
> 
> Drake 
> 
> 
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> 
> David Brearley, Technical Editor
> SolarPro magazine
> NABCEP Certified PV Installer 
> david.brearley at solarprofessional.com
> Direct: 541.261.6545
> Fax:  541.512.0343
> 
> Visit our Web site at solarprofessional.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20080902/c6d35d41/attachment-0003.html>