XW6048 running a 1HP pump? [RE-wrenches]
Mark Edmunds
mark.edmunds at xantrex.com
Mon Jun 9 18:05:28 PDT 2008
Hi Jay - You can run 3 XW's in parallel for up to 18kw.
Mark
Mark Edmunds
Xantrex Technology Inc.
-----Original Message-----
From: Jay Peltz, Peltz Power [mailto:jay at asis.com]
Sent: Monday, June 09, 2008 5:41 PM
To: RE-wrenches at topica.com
Subject: Re: XW6048 running a 1HP pump? [RE-wrenches]
HI Mark,
I've just had someone ask me about starting some 5 hp tools ( table
saw etc)
Now I don't know if this is peak or running HP, will check,
but how many XW's can I parallel to run at 120/240?
Thanks,
jay
peltz power
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list