XW [RE-wrenches]
Todd Cory, Mt. Shasta Energy Services
toddcory at finestplanet.com
Fri Apr 11 10:00:57 PDT 2008
<x-flowed>
From another installer:
I spent almost 3 hours on the phone with xantrex tech support and we
have NOT resolved this issue. The nature of the problem is this: The
inverter is in Sell to Grid mode and is inverting far less then its
capacity (around 1kW) but it sounds like it's about ready to explode.
There is a very loud 60hz hum with lots of higher frequency squeels and
buzzes as well. It is loud enough that the sheet metal cases of the
equipment is rateling and buzzing as well is the inards. When this is
happening the battery voltage would be between 53.5-54 volts.
It would do this for about 30 seconds and then stops for 5-10 seconds.
When it stops the inverter kicks out of Sell to Grid and into Grid
Support mode. The battery voltage spikes to 59-60 volts and it stops the
charge controllers from charging- the controllers said 0-15 watts. And
then the cycle starts again... load humming even though it's only
processing 1/6th the array power, and then silence....
Darryl Thayer wrote:
>Todd
>I have installed one system, it installed very easy,
>and so far trouble free.
>
>What problems have you heard of?
>Darryl
>--- "Todd Cory, Mt. Shasta Energy Services"
><toddcory at finestplanet.com> wrote:
>
>
>
>>I need some feedback from wrenches that have
>>installed XW systems. I am
>>looking at doing one for a customer this summer, but
>>I have heard from
>>some installers that have had problems. Are there
>>wrenches that would
>>care to share their experiences?
>>
>>Todd
>>
>>
>>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list