external chargers for Outback [RE-wrenches]

[Blair May]

Look into the Victron product line,they offer some very good battery
chargers + chargers/power supplies. They also offer other products for
the off grid market.
The charger I use will operate between 185-264 v &
45-65Hz.www.victronenergy.com
Additional info contact me off list. TUMP

-----Original Message-----
From: Todd Cory, Mt. Shasta Energy Services
[mailto:toddcory at finestplanet.com] 
Sent: Friday, April 04, 2008 1:33 PM
To: RE-wrenches at topica.com
Subject: Re: external chargers for Outback [RE-wrenches]



I think this is why many people (amazingly including me) are giving the 
Xantrex XW a serious look. Outback's stubborn refusal to include two AC 
inputs on their grid tied inverter is a major wart and caused me to 
become quite disappointed with them. The best work around is running the

genny output through a 2:1 step down transformer, rectifying it and 
dumping that into a MX60.

Todd



Bruce Erickson wrote:

>
>
> Hello All,
>
> What have people used/been happy with when you need a large external
> charger for a grid-tied Outback system? We installed an IBE  24GPU70  
> to generator charge 2 strings of 390 ah Trojans, and the thing seems  
> to be very inefficient. Looking over the IBE sizing chart and  
> comparing AC kw required for various continuous DC outputs, the  
> efficiency seems to be in the 50-60% range, which is about what we  
> observed in our system. Is there anything else out there that can  
> deliver around 100 amps DC with reasonable efficiency and reliability?
>
> Bruce Erickson
> Mendocino Solar Service
> PO Box 1252
> Mendocino, CA 95460
> 707-937-1701


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------