[RE-wrenches] XLP - UL vs ETL
Geoff Greenfield
geoff at third-sun.com
Mon Dec 15 11:15:44 PST 2008
I am looking at some USE-2 wire for a job and just noticed that it's jacket says ETL not UL. I checked with the AHJ and he approved it (but I am wondering about AHJs in other parts of my service territory). Anyone been down this path before?
For a brighter energy future,
Geoff Greenfield
Founder and CEO
Third Sun Solar & Wind Power Ltd.
340 West State Street, Unit 25
Athens, OH 45701
740.597.3111 Fax 740.597.1548
www.Third-Sun.com
Clean Energy - Expertly Installed
----- "Carl Hansen" <solarwks at cybermesa.com> wrote:
> Hi Dana, there is one being advertised in Home Power Magazine, you can check
> them out at ArtTecsolar.com
> Carl Hansen
> _______________________________________________
> List sponsored by Home Power magazine
> List Address: RE-wrenches at lists.re-wrenches.org
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> Check out participant bios:
> www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20081215/863fefa3/attachment-0002.html>
More information about the RE-wrenches
mailing list