Errors in XW Wiring Diagrams? [RE-wrenches]

[Mick Abraham]

Greetings~

It appears that there are some misprints in the nice colored diagrams 
with XW documentation. Mark Edmunds may wish to pass this information 
along or please notify on List if I'm wrong or if Xantrex has previously 
discovered/corrected the errors. 

The "XW Power System Installation Guide" has fold out diagrams as 
appendices in the back. The documents marked Figure B-3, B-4 & B-5 have 
this mistake and also the similar slicker/bigger images in the back of 
the "XW Power System-Installation Overview" (Revision A) publication.

One needs a magnifying glass to even follow the dotted lines, but the 
diagrams show grid power connecting to the AC OUT of the inverters, and 
they show the inverters' GRID IN connected to the downstream loads. This 
transposition is incorrect and is not consistent with how the physical 
cables are marked in the XW Distribution Panel.

Regards to all, 

Mick Abraham, Proprietor
www.abrahamsolar.com


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------