208 V 2 pole meter [RE-wrenches]

[Steve Johnson]

Darryl and Jeff thanks for your views.  I also have one of these systems 
operating in another utility with no apparent problems.
Anyone else have feedback on this?



jeff wrote:
> 
> I concur with Darryl.  We've used several CL200 240V 3W (single phase) 
> glass
> bulb meters connected line to line on 208Y120 three phase service and 
> they
> work just fine, meaning that over time the meter reading and inverter
> E-total are within a few percent of each other.
> 
> If you have doubts or need meter help, Austin International in SC is 
> pretty
> helpful.
> 
> Jeff Irish
> Hudson Valley Clean Energy
> 
> -----Original Message-----
> From: Darryl Thayer [mailto:daryl_solar at yahoo.com] 
> Sent: Tuesday, December 11, 2007 5:26 PM
> To: RE-wrenches at topica.com
> Subject: Re: 208 V 2 pole meter [RE-wrenches]
> 
> 
> I am surprized if he is correct.  The meters work on
> 120 to 240 volt just fine, your power is single phase
> added to a three phase load, your meter is single
> phase, I think it will work.  Perhaps you can get
> intouch with the meter people.  
> Darryl
> --- Steve Johnson <stevejohnson at comcast.net> wrote:
> 
> > 
> > I have installed a SB 400US in a system with a PV
> > production meter.  The 
> > main meter is a 208v, 3 phase CT.  The PV production
> > meter is on the 
> > load side of the main meter.   From the inverter it
> > goes through an AC 
> > disconnect, through a 2 pole feed through meter
> > base, and onto a 2 pole 
> > breaker in the main panel.
> > 
> > The utility meter guy says his 2 pole 240 v
> > single(split) phase meter 
> > won't read the 208v 2 pole output of the Sunny Boy
> > correctly because it 
> > has a 240 volt coil in it.  Says they don't make a 2
> > pole 208 volt 
> > meter.
> > 
> > Is this right?  What to do?  I guess I could change
> > the meter out to a 3 
> > phase 208v meter base and they could put in a feed
> > through 3 phase 
> > meter, there just wouldn't be any power on the third
> > leg.
> > 
> > Anybody else run into this?
> > 
> > Steve
> > 
> > Steve Johnson
> > 
> > 
> > - - - -
> > Hosted by Home Power magazine
> > 
> > To send a message: RE-wrenches at topica.com
> > 
> > Archive of previous messages:
> > http://lists.topica.com/lists/RE-wrenches/read
> > 
> > List rules & how to change your email address:
> > www.mrsharkey.com/wrenches/etiquette.php
> > 
> > Check out participant bios:
> > www.mrsharkey.com/wrenches/
> > 
> > Moderator: michael.welch at homepower.com
> >
> > 
> > 
> 
> 
> 
>  
> ____________________________________________________________________________
> 
> ________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile.  Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 
> 
> 
> - - - -
> Hosted by Home Power magazine
> 
> To send a message: RE-wrenches at topica.com
> 
> Archive of previous messages: 
> http://lists.topica.com/lists/RE-wrenches/read
> 
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
> 
> Check out participant bios: www.mrsharkey.com/wrenches/
> 
> Moderator: michael.welch at homepower.com
> 
> 
> 



Steve Johnson
LightWave Solar Electric
Nashville, Tennessee


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------