Sanyo HIT panels in off grid app [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Thu Nov 1 20:39:44 PDT 2007
<x-flowed>
Hi Larry,
I have seen two systems that use the Sanyo 190's, 2 in series into a
MX-60 without problem.
Lowest temps in this area are around 20 degrees F, which is really
rare. Usually its only just below freezing.
It is true that at the lowest temps, the MX-60 will not connect, but
the VOC isn't high enough
to damage the MX-60.
Once the panels warm up, volts drop and the MX-60 will connect.
These were systems that I didn't design.
I don't like to use the Sanyo for battery based systems unless its
really warm all the time,
like Baja
jay
peltz power
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list