module connector issues [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Mon Aug 20 13:14:00 PDT 2007
<x-flowed>
Hi Jeff,
Yep it gets pretty weird.
But the reason for the change has been the code @#%&.
It was deemed that a "locking" connector was the correct way to go.
Personally I like the old type 2 connectors ( rubber plug type ).
But I'm stuck with the new stuff,
jay
peltz power
On Aug 20, 2007, at 12:53 PM, Jeff Yago wrote:
>
> OK, now I'm really confused.
>
> After killing off junction boxes, manufacturers switched to Type 1
> single conductor MC-1 connectors. Then for some unknown reason they
> switched to Type 2 two conductor MC-2 connectors, then some module
> manufacturers are now shipping with an MC-3 connector (whatever
> that is), now some module manufacturers are shipping with Tyco
> Solarloc locking connectors.
>
> Is this just an improvement of an older product and these early
> generation connectors are slowly being phased out, or does each
> have a special use and all will still be made for some time. I know
> there is also some code issues that may be driving this to make
> them more secure or locking, and if this is the case, are these
> older types not going to meet new code requirements.
>
> Finally, I can't help but think we all soon will be sitting on the
> shop floor with boxes of special adapters trying to connect all
> these mis-matched module ends to junction boxes and other strings.
> Sounds like solar array wiring will start to look like my strings
> of Christmas tree lights.
>
> Jeff Yago
> Dunimis Technology Inc.
>
> _____________________________________________________________
> Netscape. Just the Net You Need.
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://lists.topica.com/lists/RE-
> wrenches/read
>
> List rules & how to change your email address: www.mrsharkey.com/
> wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list