standing seam work surface [RE-wrenches]

[Bob Ellison]

<x-flowed>

Second try to send this, the original never got posted.

Bob

On 5/18/07, robert ellison <reellison at gmail.com> wrote:
> In most cases in this part of the country (Northern New York) S5
> clamps can't be used because the metal roofs in the area are not the
> crimped standing seam roof that the S5 clamps will clamp to. The roofs
> we have are put on in 3' (or so) wide sheets that are ribbed and no
> way to put clamps onto the ribs as they are 1 1/2" wide or so.
> I did meet a fellow who installs standing seam roofing at the last
> energy fair in Canton. Up to that point I didn't think there was
> anyone up here with the equipment to do standing seams
>
> Later,
> Bob
>
>
>
>
> On 5/17/07, Doug Pratt <dmpratt at sbcglobal.net> wrote:
> >
> > S5! Clamps my man! No holes thru the roof! (A very good idea on metal
> > roofs.)
> > http://www.s-5.com/home/index.cfm
> >
> > Cheers,
> > Doug Pratt
> >
> >
> > -----Original Message-----
> > From: Kirk Herander [mailto:kirk at vtsolar.com]
> > Sent: Wednesday, May 16, 2007 7:18 AM
> > To: RE-wrenches at topica.com
> > Subject: standing seam work surface [RE-wrenches]
> >
> > Hello,
> >
> > Does anyone know of a good way to attach to a standing seam (ala roof jacks)
> > so planks can be spanned across it?
> >
> > thanks.
> >
> >
> >
> > Kirk Herander
> >
> >
> > - - - -
> > To send a message: RE-wrenches at topica.com
> >
> > Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
> >
> > List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
> >
> > Check out participant bios: www.mrsharkey.com/wrenches/
> >
> > Hosted by Home Power magazine
> >
> > Moderator: michael.welch at homepower.com
> >
> >
> >
> >
>


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------

</x-flowed>