HUP VS Rolls [RE-wrenches]
Windy Dankoff
windydankoff at mac.com
Tue Mar 20 08:00:01 PDT 2007
<x-flowed>
Wrenches -- My anonymous lurking buddy contributes this to the
discussion.
-- Windy
> I've been following with some interest the never ending battery
> saga on the Wrench board. The latest rendition centers around the
> Rolls/HUP debate, and how Jeff Yago was unable to get a set of
> Rolls fully charged. Not to attack nor defend Rolls (I don't have
> any experience with them myself) .. I know of instances in
> batteries where the mfgr-supplied H2SO4 was too weak and
> subsequently lacked the necessary strength to ever fully charge.
> The weak electrolyte manifested itself by lower-than-expected cell
> voltages (takes a good DVM to differentiate), decreased A-H
> capacity from spec, lowered SG, and the inability to ever fully
> attain 100% SOC, particularly as measured by the SG. In the
> instances with which I'm familiar, when some of the existing
> electrolyte was removed and replaced slowly by a more concentrated
> H2SO4 solution, the SG increased to expected values. Following a
> reconditioning charge, the battery functioned normally thereafter.
>
> Not saying this is the case here .. but it has the same feel...
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list