aux contact [RE-wrenches]
Christopher Freitas --- OutBack Power
cfreitas at outbackpower.com
Thu Mar 1 16:41:31 PST 2007
Actually the AUX Output current limit for all of the FX series of
inverters is 1 amp maximum - we advise not using a fan rated for more
than 0.8 amps / 10 watts DC @ 12VDC. The output is electronically
current limited and no additional fusing or overcurrent protection is
required.
The MX60's AUX Output is limited to 250 milliamps (1/4 amp) and we
advise not going above 200 milliamp / 2.5 watts @ 12VDC) for fans etc.
It also is electronically current limited.
Both the FX and MX have battery box vent fan modes - they differ
slightly in operation - the manuals detail all of this.
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030
Todd wrote:
> Yep, it is in the menu of the mate. I believe the limit is 200 ma at
> 12 volts.
Mike Bernhard wrote:
> Third time's the charm? Can the aux contact on the VFX3648 Outback
> inverter be programmed to control the battery box vent fan. If so,
> how? The system has a xantrex c-40 controller not aa MX60.
> Mike Bernhard
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list