PV Negative color [RE-wrenches]
Ron Schroeder
wd8cdh at optonline.net
Thu Dec 6 13:14:16 PST 2007
<x-flowed>
And since it is normally groundED, it must still be white.
Ron Schroeder
WD8CDH
NABCEP Certified Solar PV Installer TM
----- Original Message -----
From: <erika at repowersolutions.com>
To: <RE-wrenches at topica.com>
Sent: Thursday, December 06, 2007 3:28 PM
Subject: RE: [SPAM] PV Negative color [RE-wrenches]
>
> Your concern is addressed by labeling per 690.5(C) not by color.
> If if you have some GFP, the label should say something like:
> ground fault is indicated when xxx, grounded conductors may be energized.
>
> erika
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at re-wrenches.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list