MC Connector suppliers [RE-wrenches]
Warren Lauzon
windsun at wind-sun.com
Sun Jul 29 11:59:41 PDT 2007
<x-flowed>
Hmm.. interesting. I was not aware of that, and have seen no info on it. The
MC info only states USE2, and says nothing I can find about the stranding.
But that might explain why I can find no fine strand USE2.
It looks like the cable on one of our old used modules is 39 strand, which
is obviously a lot more flexible than the standard 7 strand.
..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun
..................................................................................................
----- Original Message -----
From: "David Katz" <david at aeesolar.com>
To: <RE-wrenches at topica.com>
Sent: Sunday, July 29, 2007 11:01 AM
Subject: Re: MC Connector suppliers [RE-wrenches]
>
> Warren,
> You are required to use 7-strand USE-2 wire to make the cables. The finer
> stranded wire that the module manufactures use will not allow you to make
> UL approved cables.
> David
>
> David Katz
> AEE Solar, Inc.
> formerly Alternative Energy Engineering
> 1155 Redway Drive - Box 339
> Redway, CA 95560 USA
> Phone 707-825-1200
> Fax 707-825-1202
> email dkatz at aeesolar.com
> www.aeesolar.com
>
>
>
>>
>
>
> - - - -
> Hosted by Home Power magazine
>
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
> www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Moderator: michael.welch at homepower.com
>
>
>
>
- - - -
Hosted by Home Power magazine
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list