interrow shading [RE-wrenches]
Ryan Mayfield
ryan_mayfield at earthlink.net
Fri Jan 26 12:46:20 PST 2007
This table was given to me a few years ago from Jeff down at DP&W. He said he got it out of an old Arco manual so it's been around for awhile!
I have tested the spacing factors at my latitude, ~45, by looking at an existing array on a flat roof with a Pathfinder, and the results seem good. From Peter's approach, the 35 degree column seems to be consistent as well. I would love to get a report from somebody at ~40 degrees as I would think there would be a difference in the "No shading after 9AM" column for 35 and 40 degrees. I would expect it to be closer to 2.5 time the height.
I hope the formatting comes out OK, contact me off list if you can't read it and I can send the attachment.
Ryan
Formula: DISTANCE = HEIGHT x SPACING FACTOR (SF)
Latitude For no shading after 8:00am For no shading after 9:00am
20deg SF=3 -
30deg SF=5 SF=1.8
35deg SF=6.5 SF=2.2
40deg SF=10 SF=2.2
45deg SF=23 SF=3
>
>It would be great if someone would come up with a table that gives the
>X-factor, based on latitude and no-shade hours, but I haven't been able to
>find one and if any one has found such a table, I for one would be greatly
>indebted if they would share it.
>
>
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list