New IEEE neutral sensing BS [RE-wrenches]

[William Miller]

<x-flowed>

Friends:

I knew it was coming but I did not see the implications:

The new standard requires that inverters sense phase-to-neutral 
voltage.  We just installed a Xantrex GT5 in a commercial setting with an 
"Open Delta" configuration.  We had to do a line side tap in order to 
comply with NEC 690-64.  Space for line taps was tight so I chose the two 
leads with the most room.  One was the stinger-- and the new IEEE compliant 
inverter would not operate on the stinger.

My lead electrician is on site now and I do not envy the contortions he is 
going through to relocate the tap connector.  Furthermore, if we wanted to 
put in more than one inverter (ideally three), we can not balance our 
inverters on phases.

This is a real down side to the new regulation and grounds for insisting 
that a means be included to adjust the window or disable neutral sensing.

Bill Brooks, John Wiles,  comments?

William Miller


__________________________________________________________________
William Miller
Miller Power and Communications
Voice :805-438-5600     Fax: 805-438-4607
email: wrmiller at mpandc.com
http://mpandc.com
License No. C-10-773985


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>