Utility meter questioned [RE-wrenches]
William Miller
wrmiller at charter.net
Thu Dec 7 18:24:19 PST 2006
<x-flowed>
Jim:
Up stream.
William Miller
At 08:47 AM 12/6/2006, you wrote:
>Where are the meter current transformers located relative to the solar feed?
>
>Jim Easton
>Alternative Energy Technologies
>CSL: 852243
>9465-B Mission Park Place
>Santee, CA 92071
>Tel: 619-262-8800
>Fax: 619-562-8811
>Cell: 858-527-0240
>
>-----Original Message-----
>From: William Miller [mailto:wrmiller at charter.net]
>Sent: Tuesday, December 05, 2006 8:19 AM
>To: RE-wrenches at topica.com
>Subject: Utility meter questioned [RE-wrenches]
>
>
>Colleagues:
>
>We recently installed a 30 KW system on a manufacturing facility. The
>customer just received the first utility bill since the system was
>energized. The bill shows no savings on the electric bill.
>
>The electronic utility meter screen 99 is reported to show instantaneous
>consumption or generation into the grid. I read the meter screen 99 at
>between .64 and 2.0 KW. Each of the 6 inverters were putting out about 2.0
>KW each. When operating, the inverters were putting 28 amps back into the
>grid on each phase.
>
>I then shut down the inverters and the meter reading 99 did not
>change. This is especially surprising in light of the fact that the plant
>was in operation with all three sublimation machines and the complete line.
>
>I will meet with the utility to see if there is indeed a problem with the
>meter. In the meantime, has anyone had any experience like this?
>
>Thanks for your thoughts.
>
>William Miller
>
>
>__________________________________________________________________
>William Miller
>Miller Power and Communications
>Voice :805-438-5600 Fax: 805-438-4607
>email: wrmiller at mpandc.com
>http://mpandc.com
>License No. C-10-773985
>_____________________________________________________________
>Check out our latest project at
>http://mpandc.com/case_studies/pv_school/pv_school.html
>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & how to change your email address:
>www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & how to change your email address:
>www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list