Tri-Metric program question [RE-wrenches]

[Windy Dankoff]

<x-flowed>


YES, Mick. According to the instructions on a recent Tri-Metric I set  
up, its memory is non-volatile.
Windy


> From: Mick Abraham <mick at abrahamsolar.com>
> Subject: RE: Tri-Metric program question
>
>
>
> Building on my relay suggestion posted a few daze ago (copied  
> below): if
> the relay was an "on-delay" type, the delay could be set for 12  
> hours or
> however long a grid powered recharge is calculated to take. When grid
> comes back up, the TM-2020 meter would continue to be powered up and
> running until the time out period occurs. This would totally avoid the
> problem of a reset to 100% occurring as a result of a short term  
> return
> of grid power. Now the question is: are the meter program settings
> permanently non-volatile?
>
> Mick A.


--
[Non-text portions of this message have been removed]


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>