SW Fan seems to stay on [RE-wrenches]

[Allan Sindelar]

Travis,

Here is part of the answer, but not the whole answer.

When you get to the last menu heading (19?) press the red and green buttons
simultaneously, just as you did to get into the setup mode. If successful,
you'll get into a tech diagnostic mode. Most of the items in there are
numbers that are meaningless to us Wrenches. But scroll down; I think the
last menu item is Fan Speed, 1-4. That fan speed reading may assist you with
your diagnostics.

Allan at +E

----- Original Message ----- 
From: "Travis Creswell, Ozark Solar" <ozsolar at ipa.net>
To: <RE-wrenches at topica.com>
Sent: Monday, July 31, 2006 12:55 PM
Subject: SW Fan seems to stay on [RE-wrenches]


>
>
> Hello All,
>
> I've got a SW4024 that the fan doesn't seem to turn off.  It's in an
> unattended dual inverter off-grid system.  The customer and I've have only
> been there when the ambient temp was 95+ so maybe the fan was just running
> due the ambient being so high.  The loads were very light (0 to less then
a
> 200 watts) so I'm thinking they didn't warm the inverter up enough to turn
> the fan on.
>
> I know they sometimes fail "on" but never had it happen to me.  Any advice
> would be appreciated.
>
> Thanks in advance.
>
> Travis Creswell
> Ozark Energy Services
>
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read
>
> List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
>
> Check out participant bios: www.mrsharkey.com/wrenches/
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------