Generator auto start [RE-wrenches]
Kelly Keilwitz
kelly at whidbeysunwind.com
Tue Jan 10 23:46:36 PST 2006
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaemrnbz8Qcsbz9JC9a/PC PowerScan
-------------------------------------------------------------------
Hi Dan,
Thanks for the tip, it makes sense. But, if it's 12V why double pole? Do you
use 12V on both poles? Must have to do with the control circuit (?).
-Kelly
On 1/10/06 6:26 PM, "Cvsolar2 at aol.com" <Cvsolar2 at aol.com> wrote:
>
> hey Kelly;
> dan here. i managed to connect to a droid at generac a few years ago.
> seems the only way to fake a two wire start on generacs is to use your outback
> relay set up to trip a two pole relay connected in parallel with the manual
> side of the two pole control switch on the genny. (the rocker switch). i get
> 12v from the 15A fuse. on the gen set, and make the circuit through the relay
> driven by the outback. leave the rocker in off.
> give me a jingle if you run into a snag. db (802)-747-0577 (work)
> (802)- 483-2564
>
> --
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to $1,500 on your phone bill with Packet8
Free Activation, Free Equipment & First Month Free!
30-day money back guarantee. 1-877-868-1135
http://click.topica.com/caaemrkbz8Qcsbz9JC9f/ TMONE
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list