Matching Outback inverers on powerboard? [RE-wrenches]
Todd Cory, Mt. Shasta Energy Services
toddcory at finestplanet.com
Sat Aug 26 19:44:08 PDT 2006
<x-flowed>
This is great news. I am a one man shop and cannot handle the weight of
prewired systems. I also do all my PSAC/PSDC wiring in the field.
Numbered or color coded wiring aids would make this go much faster.
Sounds like Outback has made the best even better. I look forward to the
new wiring components.
Todd
Matt Tritt wrote:
>
> Or, another idea, you can wait a bit for the new "grey metal" OB stuff
> (replaces all the current bits and pieces painted GREEN) and have
> something pretty slick. A benefit of the new system is that the
> mounting plate is <48" wide and the boxes way deeper and easier to
> work in. There is also a mini gutter box that runs side-to-side
> between the inverters to connect stuff without having to cut holes in
> plastic (or metal). The OutBack guys are really keen on their new
> setup, and they should be. I'm not sure how long it will be before it
> hits the loading docks since the distributors will have to deplete
> current stocks before getting the new.
>
> I asked them about supplying a color coded wiring set (or numbered to
> match terminal points) for field-assembled systems and they expressed
> interest in doing it. But time will tell.
>
> We almost always do our own wiring on their panels in the field, since
> the all-up weight makes installing the pre-built systems kind of a drag.
>
> Matt T
*
*
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list