WEEB grounding [RE-wrenches]
Bob Ellison
ellison at gisco.net
Mon Jul 24 16:45:10 PDT 2006
Hi Dave,
I missed the fellow at the fair, nice to see you though. They are a very
interesting piece, and I plan on trying some on an upcoming install. I like
the idea and think they should work well.
Have you seen their web sire?
If not I will send it to you. There are only 2 kinds one bolts through and
one for clamp on type panel racks. These are just like the paper clip, why
didn't I think of it?
http://www.we-llc.com/
Later,
Bob Ellison
-----Original Message-----
From: David Palumbo, Independent Power & Light [mailto:ipl at sover.net]
Sent: Monday, July 24, 2006 4:00 PM
To: RE-wrenches at topica. com
Subject: Re: WEEB grounding [RE-wrenches]
Wrenches,
You probably have received an e-mail ad for WEEB Lugs and WEEB Splice Kits.
The following is a quote from their web page. Is this legit? Have you seen,
or used the products?
Is this NEC Approved?
David
<<Grounding the entire array is even easier! Simply mount one WEEBLug for
each rail, making sure the teeth will penetrate into the aluminum rail. (The
lug itself is tin plated copper and the washer is stainless, so that
connection can be pressure only.) The lug is a lay-in type, making it easy
to attach the ground wire. Because you don't have to run ground wire to
every single module, you save time and make a much cleaner installation.
Neat!
www.we-llc.com/WEEB.html.>>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list