Coleman for off-grid [RE-wrenches]
Allan Sindelar
allan at positiveenergysolar.com
Fri Jul 7 17:45:01 PDT 2006
Jeremy,
Yes, so I talked with Dave in sales there. He is happy to serve Colorado
dealers, but
referred me to Coleman directly, as we are in New Mexico. Apparently, you
can set up with Coleman directly to carry their products.
He also cautioned that the unit can't be reconfigured to full output at 120
VAC, and he has seen premature failures, especially with the 15kW unit, when
charging a single inverter out of balance. And one more thing: he
recommended weekly exercise; says he has seen premature bearing failures
with monthly/bimonthly exercise cycles, as the oil film drains out of key
spots in that much time.
Was highly opinionated, but knew his stuff and didn't try to make a sale; I
respect that.
Allan at PosE
----- Original Message -----
From: "Jeremy Rodriguez" <allsolar at ris.net>
>
> We get them from Rocky Mountain Power Generation in Denver
> Retail for around $4,200.00
>
> Jeremy
>
> Travis Creswell wrote:
> >
> > Where do you get these units? How much?
> >
> > -----Original Message-----
> > From: Jeremy Rodriguez [mailto:allsolar at ris.net]
> >
> > We have been using the Coleman 11.5kw units with the Honda Industrial
> > engine with good sucess.
> >
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list