Ethernet on Mod Sine Wave [RE-wrenches]
Ray Walters
walters at taosnet.com
Thu Jun 8 14:52:35 PDT 2006
<x-flowed>
We had a customer we upgraded from an old Trace U series to an Outback.
His old Staber washer wouldn't run unless other loads were on. Seems
that some weird feed back was occurring when just the Staber and Outback
were on. I didn't get the full report, but somehow the Staber
electronics were tricking the Outback to think its voltage output was
out of spec. A 50mF Cap cured the problem. I've also got another
customer who can't run a Frigidaire front loader on SWs. It gets stuck
on the Spin cycle I believe, so they have to run a generator when they
wash. I didn't do any of the original work, so I haven't tried fixing
that one. Maybe a cap would cure that too. Then I had a couple of
Stabers that kept cooking control boards one on a DR, and one on a SW+.
Meanwhile I've got folks running old top loaders on DRs for over 10
years no problems.
Hey I've even had trouble with a front loading washer on dirty grid
power! (smoked control board after 4 months) Those VSD controls are
delicate.
Ray
Todd Cory, Mt. Shasta Energy Services wrote:
>
> Say more... Our Outback unit runs the front loading variable speed
> drive washer just fine.
>
> Todd
>
> Ray Walters wrote:
>
>> often sine wave inverters have trouble too. (ie. New front loading
>> washers with variable speed drives).
>>
>> Good Luck,
>>
>> Ray Walters
>
>
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list