UV Resistant Insulation for Hot Water Pipes [RE-wrenches]

Kurt Albershardt info at es-ee.com
Sun May 7 09:26:05 PDT 2006


<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaeKAPbz8Qcsbz9JC9a/PC Powerscan
-------------------------------------------------------------------

--On Saturday, May 06, 2006 9:51 PM -0400 Ken Schaal <ken at commonwealthsolar.com> wrote:
>
> Here in central VA possible temps of -10 to 105 , I've used drainback
> since 1979 very successfully. Tested performance of 700-800 BTU's per
> sq ft of collector [ single glazed, selective surface ]per day, annual
> average. Draw profile is a major influence on performance.
>
> Typical residential flow rates, tap water for fluid, is 1-2 gpm thru
> 1/2 " Kitec pipe, with copper for several feet on the inlet and about
> 6' on the outlet.


Has anyone tried Rehau Insulpex for SHW?  PEX tubing surrounded by polyurethane insulation and covered with an LDPE jacket.  They make it in larger diameters that are looking like a possible solution for a commercial project.

<http://www.rehau-na.com/construction/heating...plumbing/energy.transfer.piping..shtml>







.


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------

</x-flowed>



More information about the RE-wrenches mailing list