was Outback PS2 - now FLEXware [RE-wrenches]

[Christopher Freitas --- OutBack Power]

The new FLEXware enclosures are setup for all of the knockouts spaced 
from the wall to allow Uni-strust brackets - both with and without the 
mounting backplate in use. Without the mounting plate you go with the 
low profile type and with the mounting plate you use the standard type.

So - I need to check on the location of the knockouts on the PSX-240  to 
see if they line up...  hummm... hang on... 

Christopher
  

Jason Lerner wrote: 
> Does the X-240 in it's own enclosure have KO's that meet up with KO's on 
> the Flexware?


Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com  
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030  


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------