off grid modular home [RE-wrenches]

Allan Sindelar allan at positiveenergysolar.com
Thu Nov 17 09:18:34 PST 2005


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaedmqbz8Qcsbz9JC9a/PC PowerScan
-------------------------------------------------------------------

Ken,
Usually they're not bonded, as that is done at the exterior meter panel.
Bond normally per NEC at the first point of disconnection, as for any
offgrid system; in this case in the PS2AC. By the way, watch for multiwire
branch circuits and killer furnace loads...
Allan at Positive Energy

----- Original Message ----- 
From: "Ken Hulet, Engineering Services Co." <Ken.Hulet at redwoodalliance.org>

We're setting up an off grid Outback PV system on a brand new modular
home, you know two trailers connected together with vinyl siding.

During our quick examination of the main panel it looks like the
neutral and ground are NOT bonded together here. I assume this could be
some holdover from trailers where the power supplied to the trailer was
fed from a panel where the ground/neutral bonding occurred.

What's the correct/best way to deal with this?

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
FREE DVR
And up to 3 additional standard receivers!
Call 1-800- 901 - 5080 Today
http://click.topica.com/caaeas1bz8Qcsbz9JC9f/DirectSatTV
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------







More information about the RE-wrenches mailing list