Outback AC plumbing [RE-wrenches]
Ray Walters
walters at taosnet.com
Wed Nov 16 10:57:10 PST 2005
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaedmqbz8Qcsbz9JC9a/PC PowerScan
-------------------------------------------------------------------
Thanks for all your ideas. We have tried the flex straight out of the
inverter without the adapter. We found 2 problems: the clearance is
really tight to bend #6 wires to the terminals and we began visibly
bending the metal trapezoid plate. The 2nd problem was the flex 90 hit
the cooling fins of the inverter causing more bending of the plate. I
like the Midnite solar idea, only from the picture it looks like there
flex 90 is bending at a more than 90 degree angle , just like mine.
Maybe they have flex 105 degree fittings I can't get?
I'm just so old fashioned.... I got really used to hooking up Trace
inverters AC side with a single offset nipple, but hey their clearances
on the old stuff were bad too....
Ray
>There is a cure for this coming around the corner, check out
>www.midnitesolar.com
>How about the AC and DC in a single box with the inverter built into the
>hinged cover?
>It is cheaper, smaller and prewired.
>Check out the web site for all the info.
>
>Later,
>Bob
>
>
>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
FREE DVR
And up to 3 additional standard receivers!
Call 1-800- 901 - 5080 Today
http://click.topica.com/caaeas1bz8Qcsbz9JC9f/DirectSatTV
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list