outback breakers [RE-wrenches]

[Travis Creswell, Ozark Solar]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Show your pride with a free* USA T-shirt.  Click here to confirm 
your address.
http://click.topica.com/caadc70bz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

Speaking of shunts...

Isn't the brass bolt that holds the battery cable lug to the shunt too short
for safety for a dual inverter system?  Or am I missing something?

Travis Creswell
Ozark Energy Services, Inc.
 

-----Original Message-----
From: Phil Undercuffler [mailto:phil at dankoffsolar.com] 
Sent: Tuesday, February 22, 2005 4:10 PM
To: RE-wrenches at topica.com
Subject: Re: outback breakers [RE-wrenches]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get both the PlayStation2 and Game Cube for Free! Click here to 
find out how.
http://click.topica.com/caac8utbz8QcsbAg8QQa/Consumer Research
-------------------------------------------------------------------

on 2/22/05 2:27 PM, Christopher Freitas --- OutBack Power at
cfreitas at outbackpower.com wrote:

> Making sure that the screw driver being used is the right size makes a
> abig difference -

We've been using 3 different sizes of Snap-On driver inserts, carefully
choosing which one has the tightest match.   The fact that the tolerance on
ONE screw varies this wildly suggests that the screw driver isn't the
problem, however.  Were the Ilsco bars that much more expensive?


But thanks for the confirmation on my numbers.  Any help on the shunt
torque?

Phil

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
http://click.topica.com/caadc7Zbz8QcsbAg8QQf/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a FREE* MP3 Player - yours to keep! Click Here Now!
http://click.topica.com/caac8uxbz8Qcsbz9JC9f/MP3 Player Giveaway
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------