Honda Gennie Problem [RE-wrenches]

[Roy Butler, Four Winds RE]

<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a FREE* MP3 Player - yours to keep! Click Here Now!
http://click.topica.com/caac8uxbz8Qcsbz9JC9a/MP3 Player Giveaway
-------------------------------------------------------------------

Gee.....I just knew I was missing something there.....;-(

Allan Sindelar wrote:

>Your free subscription is supported by today's sponsor:
>-------------------------------------------------------------------
>Need a Laptop? Get a Sony Vaio Laptop Free!
>http://click.topica.com/caac8usbz8QcsbAlljZa/ProductTestPanel
>-------------------------------------------------------------------
>
>
>----- Original Message ----- 
>From: "Roy Butler, Four Winds RE" <roy at four-winds-energy.com>
>
>Is that Honda 12vdc battery charging circuit being used for anything
>other than your fuel relay? I wonder if it wouldn't be as simple as
>connecting a low-cost 12 volt starting battery to that charging circuit.
>That would act as a ballast to smooth out the ripples. I know....it's
>probably not going to be that easy!!
>
>Roy,
>Thanks for the response. No, just the fuel relay. But help me understand,
>here: If I add a battery, I eliminate the ripple, OK. But I also will still
>have (battery) voltage when the engine stops, so how would that solve the
>problem of opening the fuel solenoid relay coil when the engine stops?
>Allan
>
>
>
>  
>

-- 
Roy Butler
NABCEP Certified Solar PV Installer™
Four Winds Renewable Energy, LLC
8902 Route 46
Arkport, NY 14807
607-324-9747
www.four-winds-energy.com
NYSERDA eligible PV installer for PON 716
NYSERDA eligible wind installer for PON 792

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started 
Now!
http://click.topica.com/caac8vhbz8Qcsbz9JC9f/TaxBrain
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>