Inverters and generators... [RE-wrenches]
Carl Emerson, Free Power Ltd.
freepower at freepower.co.nz
Wed Jun 15 13:20:56 PDT 2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
http://click.topica.com/caadzTWbz8Qcsbz9JC9a/ProductTestPanel
-------------------------------------------------------------------
Hi Todd,
This will be a remote regular VFX. I am hoping that it will be as or more
forgiving than the SW series. Can you comment on this ??
Carl E.
Carl,
I believe this heavily depends on whether you are talking about a grid
tieable FX (GVFX) or regular FX (VFX).
The grid tieable Outback inverters have very particular input parameters
for the AC input to conform with UL1741 intertie regulations. This makes
using a generator on that input very difficult if it is not heavily
regulated. If I was putting a genny on a GVFX, I would use one of the
new inverter generators available. I understand they are working on an
outboard AC1/AC2 transfer switch, as the FX series only has one AC
input, although I am not sure if the input specs on AC1 and AC2 would be
different. One can hope. IMO this is one of the only warts of Outback
inverters.
Todd
Carl Emerson, Free Power Ltd. wrote:
>Hi there,
>
>Can someone comment on how the Outback inverters compare to Brand X when it
>comes to tolerating variations in generator frequency and voltage??
>
>Carl Emerson
>Free Power Ltd.
>Auckland NZ
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 14/06/2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Take movies and games anywhere with a Free Playstation Portable!
http://click.topica.com/caadz4ebz8Qcsbz9JC9f/ProductTestPanel
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list