L-16 charging voltages [RE-wrenches]
Matt Tritt
solarone at charter.net
Wed May 25 21:06:58 PDT 2005
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to
reduce wrinkles by 68% Click here to get your 30-day free supply.
http://click.topica.com/caadslIbz8Qcsbz9JC9a/Nexiderm
-------------------------------------------------------------------
On the other hand, all of my Why two K customers (except one) are still
doing fine with their L-16's. The one exception being a guy with a huge
bank (1,400 ah) who didn't want a maintenance agreement and never
checked his batteries. They eventually just boiled dry from neglect. An
auto-waterer would have saved this from happening, but I couldn't talk
him into that either. :(
Matt T
William Miller wrote:
>
>
>
> Yet, at some point, all of my Y2K customers with L-16s found them dry
> and ruined. All of my Y2k GEL/AGM customers are still using the
> original batteries. It can't be that all of them failed to check. I
> think the water consumption was stable to a point and then increased
> suddenly.
>
> William
>
>
> At 09:26 AM 5/21/2005, you wrote:
>
>> While they should be checked more frequently, I only add water to my
>> batts perhaps four times a year. This even with the voltages held
>> higher than factory default settings on the charge controller and
>> occasional EQs approaching 16/32 volts. I think there is way too much
>> emphasis towards "maintenance free" batteries resulting in added expense
>> and a movement away from the tried and proven.
>>
>> Kurt Nelson
>
>
> --
>
> --^----------------------------------------------------------------
>
>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
http://click.topica.com/caadtaGbz8Qcsbz9JC9f/ProductTestPanel
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list